...
- 使用中のePTIDを失効させ新しいIDを再生成できる
- 万が一のSHA-1のコリジョンを防ぐことができる
- インシデント発生時に、IdP側でePTIDから個人を特定するのが容易である
...
目次
ヒント |
---|
データベースの設定方法やePTIDの送信方法については以下にも情報がありますので、適宜参照してください。
|
1. データベース(
...
MariaDB)のインストール
MySQL MariaDB をインストールし初期設定を行います。
以下のコマンドを実行してmariadbの自動起動の設定及びMariaDBのrootパスワードの設定を実施してください。以下のコマンドを実行してmysqldの自動起動の設定及びMySQLのrootパスワードの設定を実施してください。
...
|
panel |
# yum install mysql mysqlmariadb mariadb-server # chkconfig mysqld onsystemctl enable mariadb ← 自動起動を設定 # chkconfig --list mysqld mysqld 0:off 1:off 2:on 3:on 4:on 5:on 6:off ← 3、4、5がonになっていることを確認 # /etc/init.d/mysqld startsystemctl start mariadb # mysql_secure_installation
NOTE: RUNNING ALL PARTS OF THIS SCRIPT IS RECOMMENDED FOR ALL MySQLMariaDB SERVERS IN PRODUCTION USE! PLEASE READ EACH STEP CAREFULLY!
In order to log into MySQL MariaDB to secure it, we'll need the current
password for the root user. If you've just installed MySQLMariaDB, and you haven't set the root password yet, the password will be blank, so you should just press enter here.
Enter current password for root (enter for none): ← そのままEnter入力 OK, successfully used password, moving on...
Setting the root password ensures that nobody can log into the MySQLMariaDB root user without the proper authorisation.
You already have a root password set, so you can safely answer 'n'.
Change the root password? [Y/n] ← rootパスワードを設定 New password: Re-enter new password: Password updated successfully! Reloading privilege tables.. ... Success!
By default, a MySQL MariaDB installation has an anonymous user, allowing anyone to log into MySQL MariaDB without having to have a user account created for them. This is intended only for testing, and to make the installation go a bit smoother. You should remove them before moving into a production environment.
Remove anonymous users? [Y/n] ← そのままEnter入力 ... Success!
Normally, root should only be allowed to connect from 'localhost'. This ensures that someone cannot guess at the root password from the network.
Disallow root login remotely? [Y/n] ← そのままEnter入力 ... Success!
By default, MySQL MariaDB comes with a database named 'test' that anyone can access. This is also intended only for testing, and should be removed before moving into a production environment.
Remove test database and access to it? [Y/n]
← そのままEnter入力 - Dropping test database...
... Success!
- Removing privileges on test database... ... Success!
Reloading the privilege tables will ensure that all changes made so far will take effect immediately.
Reload privilege tables now? [Y/n] ← そのままEnter入力 ... Success!
Cleaning up...
All done! If you've completed all of the above steps, your MySQLMariaDB installation should now be secure.
Thanks for using MySQLMariaDB!
|
...
...
2. データベースにテーブルを作成する
MySQL上にデータベース MariaDB上にデータベース shibboleth
を作成し、テーブル shibpid を追加します。
パネル |
---|
borderColor | #cccccc |
---|
bgColor | #eeeeee |
---|
borderStyle | solid |
---|
|
# mysql -u root -p
Enter password: ← 設定したrootパスワードを入力
Welcome to the MySQL MariaDB monitor. Commands end with ; or \g.
Your MySQL MariaDB connection id is 46
Server version: 5.1.73 Source distribution5.60-MariaDB MariaDB Server
Copyright (c) 2000, 2013, Oracle and/or its affiliates. All rights reserved.
Oracle is a registered trademark of Oracle Corporation and/or its
affiliates. Other names may be trademarks of their respective
owners2018, Oracle, MariaDB Corporation Ab and others.
Type 'help;' or '\h' for help. Type '\c' to clear the current input statement.
mysql> MariaDB [(none)]> CREATE DATABASE shibboleth
mysql> ;
MariaDB [(none)] > CONNECT shibboleth
mysql> MariaDB [shibboleth]> CREATE TABLE shibpid (
-> localEntity VARCHAR (255) NOT NULL ,
-> peerEntity VARCHAR (255) NOT NULL ,
-> persistentId VARCHAR (50) NOT NULL ,
-> principalName VARCHAR (50) NOT NULL ,
-> localId VARCHAR (50) NOT NULL ,
-> peerProvidedId VARCHAR (50) NULL ,
-> creationDate TIMESTAMP NOT NULL ,
-> deactivationDate TIMESTAMP NULL ,
-> PRIMARY KEY (localEntity, peerEntity, persistentId)
-> ) ENGINE=InnoDB DEFAULT CHARSET=utf8;
|
また、テーブル shibpid にアクセスするためのデータベースユーザを新規作成します。
パネル |
---|
|
MariaDB [shibboleth] > mysql> CREATE USER 'データベースユーザ名'@'localhost' IDENTIFIED BY 'データベースパスワード'; mysql> GRANT ALL PRIVILEGES ON shibpidMariaDB [shibboleth] > GRANT INSERT, SELECT, UPDATE, DELETE ON shibboleth.* TO 'データベースユーザ名'@'localhost'; mysql> MariaDB [shibboleth] > FLUSH PRIVILEGES;
MariaDB [shibboleth] > quit
|
※端末のサイズによっては表記がずれる可能性がございます。画面を広くしてご覧ください。
...
3.
...
JDBCドライバー(mysql-connector-
...
javaパッケージ)をインストールする
以下のコマンドでMariaDB向けJDBCドライバーMySQL Connector/J(mysql-connector-javaパッケージ)をインストールしてください。
パネル |
---|
|
# yum install mysql-connector-java
|
JARファイルは /usr/share/java/mysql-connector-java.jar
にインストールされているので、
...
MySQL Connector/Jのダウンロードページ(https://dev.mysql.com/downloads/connector/j/)より mysql-connector-java-5.1.xx.zip をダウンロードしてください。
ダウンロード後にPGP署名を確認するようにしてください。"Signature"リンクの先にある
パネル |
---|
borderColor | #cccccc |
---|
bgColor | #eeeeee |
---|
borderStyle | solid |
---|
|
-----BEGIN PGP SIGNATURE-----
...
-----END PGP SIGNATURE----- |
の部分をヘッダフッタも含めてコピーし、mysql-connector-java-5.1.xx.zip.asc というファイルにペーストした上で、「GnuPG を使用した署名確認(https://dev.mysql.com/doc/refman/5.1/ja/checking-gpg-signature.html)」にある手順に従って署名検証してください。
PGPの署名検証が完了したら、ダウンロードしたZIPファイルを展開してください。中にmysql-connector-java-5.1.xx-bin.jarというJARファイルがあります。
4. JDBCドライバーをインストールする
2.で取得したJARファイルを
/opt/shibboleth-idp/ edit-webapp/WEB-INF/lib/
に配置したあとビルドスクリプトを実行しidp にシンボリックリンクを作成したあとビルドスクリプトを実行しidp.warを再生成します。
パネル |
---|
borderColor | #cccccc |
---|
bgColor | #eeeeee |
---|
borderStyle | solid |
---|
|
# cp mysql-connector-java-5.1.xxln -s /usr/share/java/mysql-connector-java -5.1. xx-bin.jar /opt/shibboleth-idp/edit-webapp/WEB-INF/lib/
# /opt/shibboleth-idp/bin/build.sh
Installation Directory: [/opt/shibboleth-idp]
[Enter] ←入力なし ←入力なし
Rebuilding /opt/shibboleth-idp/war/idp.war ...
...done
BUILD SUCCESSFUL
Total time: 3 seconds |
※端末のサイズによっては表記がずれる可能性がございます。画面を広くしてご覧ください。
...
注意 |
---|
borderColor | #cccccc |
---|
bgColor | #eeeeee |
---|
borderStyle | solid |
---|
|
mysql-connector-javaインストール時にJava8がインストールされ、Java11ではなくJava8が利用されている可能性があります。 以下のように確認し、Java8が選択されていたらJava11を利用するように切り替えてください。 パネル |
---|
borderColor | #cccccc |
---|
bgColor | #eeeeee |
---|
borderStyle | solid |
---|
| # alternatives --config java
There are 2 programs which provide 'java'.
Selection Command
-----------------------------------------------
1 java-11-openjdk.x86_64 (/usr/lib/jvm/java-11-openjdk-11.0.8.10-0.el7_8.x86_64/bin/java)
*+ 2 java-1.8.0-openjdk.x86_64 (/usr/lib/jvm/java-1.8.0-openjdk-1.8.0.262.b10-0.el7_8.x86_64/jre/bin/java)
Enter to keep the current selection[+], or type selection number: 1[Enter] ← Java11が表示されている「1」を選択
|
|
※端末のサイズによっては表記がずれる可能性がございます。画面を広くしてご覧ください。
ヒント |
---|
mysql-connector-javaパッケージを更新した場合は再度ビルドスクリプトを実行してください。 |
...
4. /opt/shibboleth-idp/conf/global.xml を修正する
/opt/shibboleth-idp/conf/global.xmlでbean MyDataSourceを定義します。
パネル |
---|
borderColor | #cccccc |
---|
bgColor | #eeeeee |
---|
borderStyle | solid |
---|
|
<!-- Use this file to define any custom beans needed globally. globally. -->
<bean id="MyDataSource"
class="org.apache. tomcatcommons. dbcpdbcp2. dbcp.BasicDataSource"
p:driverClassName="com.mysql.jdbc.Driver"
p:url="jdbc:mysql://localhost:3306/ データベース名shibboleth"
p:username="データベースユーザー名"
p:password="データベースパスワード"
p: maxActivemaxTotal="10"
p:maxIdle="5"
p: maxWaitmaxWaitMillis="15000"
p:testOnBorrow="true"
p:validationQuery="select 1"
p:validationQueryTimeout="5" />
<!--
Algorithm whitelists and blacklists that override or merge with library defaults. Normally you can leave
these empty or commented and use the system defaults, but you can override those defaults using these lists.
Each <value> element is an algorithm URI, or you can use <util:constant> elements in place of literal values.
-->
|
...
global.xml ファイルのパーミッションを設定します。
パネル |
---|
|
# chgrp jetty /opt/shibboleth-idp/conf/global.xml
# chmod 640 /opt/shibboleth-idp/conf/global.xml
|
...
5. /opt/shibboleth-idp/conf/saml-nameid.properties を修正する
idp.persistentId.sourceAttribute, idp.persistentId.salt, idp.persistentId.generatorとidp.persistentId.storeを設定します。
idp.persistentId.saltには他人が推測できないランダムな値を指定してください。古いIdPから設定を引き継ぐ場合は同じ値を指定してください。
情報 |
---|
すでにComputedIDを使用している場合はsourceAttributeとsaltは設定されているはずですので、後ろ2つを設定してください。 |
パネル |
---|
borderColor | #cccccc |
---|
bgColor | #eeeeee |
---|
borderStyle | solid |
---|
|
# For computed IDs, set a source attribute and a secret salt: idp.persistentId.sourceAttribute = uid ← アンコメントして修正 #idp.persistentId.useUnfilteredAttributes = true # Do *NOT* share the salt with other people, it's like divulging your private key. #idp.persistentId.algorithm = SHA idp.persistentId.salt = XXXXXXXXXXXXXXXX ← アンコメントして修正
# To use a database, use shibboleth.StoredPersistentIdGenerator idp.persistentId.generator = shibboleth.StoredPersistentIdGenerator ← アンコメントして修正 # For basic use, set this to a JDBC DataSource bean name: idp.persistentId.dataSource = MyDataSource ← アンコメントして修正 # For advanced use, set to a bean inherited from shibboleth.JDBCPersistentIdStore #idp.persistentId.store = MyPersistentIdStore |
...
...
6. /opt/shibboleth-idp/conf/attribute-resolver.xml
...
を修正する
storedID 用の id="eduPersonTargetedID" の AttributeDefinition と DataConnector をアンコメントします。その際、computedID 用のものがアンコメントされている場合はコメントアウトします。
パネル |
---|
borderColor | #cccccc |
---|
bgColor | #eeeeee |
---|
borderStyle | solid |
---|
|
(省略)
<!-- Attribute Definition for eduPersonTargetedID (computedID) -->
<!--
<resolver:AttributeDefinition xsi:type="ad:SAML2NameID" id="eduPersonTargetedID" nameIdFormat="urn:oasis:names:tc:SAML:2.0:nameid-format:persistent" sourceAttributeID="computedID">
<resolver:Dependency ref="computedID" />
<resolver:AttributeEncoder xsi:type="enc:SAML1XMLObject" name="urn:oid:1.3.6.1.4.1.5923.1.1.1.10" encodeType="false" />
<resolver:AttributeEncoder xsi:type="enc:SAML2XMLObject" name="urn:oid:1.3.6.1.4.1.5923.1.1.1.10" friendlyName="eduPersonTargetedID" encodeType="false" />
</resolver:AttributeDefinition>
--> ← コメントアウト
<!-- Pseudo Attribute Definition for %{idp.persistentId.sourceAttribute} -->
<!--
Uncomment this if there is an attribute named %{idp.persistentId.sourceAttribute}
only on LDAP and you don't already have an Attribute Definition for it.
-->
<!--
<resolver:AttributeDefinition id="%{idp.persistentId.sourceAttribute}" xsi:type="ad:Simple" sourceAttributeID="%{idp.persistentId.sourceAttribute}">
<resolver:Dependency ref="myLDAP" />
</resolver:AttributeDefinition>
--> ← コメントアウト
<!-- Computed targeted ID connector -->
<!--
<resolver:DataConnector id="computedID" xsi:type="dc:ComputedId"
generatedAttributeID="computedID"
sourceAttributeID="%{idp.persistentId.sourceAttribute}"
salt="%{idp.persistentId.salt}">
<resolver:Dependency ref="%{idp.persistentId.sourceAttribute}" />
</resolver:DataConnector>
--> ← コメントアウト
<!-- Attribute Definition for eduPersonTargetedID (storedID) -->
<!-- --> ← アンコメント
<resolver:AttributeDefinition xsi:type="ad:SAML2NameID" id="eduPersonTargetedID" nameIdFormat="urn:oasis:names:tc:SAML:2.0:nameid-format:persistent" sourceAttributeID="storedID">
<resolver:Dependency ref="storedID" />
<resolver:AttributeEncoder xsi:type="enc:SAML1XMLObject" name="urn:oid:1.3.6.1.4.1.5923.1.1.1.10" encodeType="false" />
<resolver:AttributeEncoder xsi:type="enc:SAML2XMLObject" name="urn:oid:1.3.6.1.4.1.5923.1.1.1.10" friendlyName="eduPersonTargetedID" encodeType="false" />
</resolver:AttributeDefinition>
<!-- --> ← アンコメント
<!-- Pseudo Attribute Definition for %{idp.persistentId.sourceAttribute} -->
<!--
Uncomment this if there is an attribute named %{idp.persistentId.sourceAttribute}
only on LDAP and you don't already have an Attribute Definition for it.
-->
<!-- --> ← アンコメント(idp.persistentId.sourceAttributeで指定した属性がLDAPで定義されているのみで、attribute-resolver.xmlに対応するresolver:AttributeDefinitionが存在しない場合)
<resolver:AttributeDefinition id="%{idp.persistentId.sourceAttribute}" xsi:type="ad:Simple" sourceAttributeID="%{idp.persistentId.sourceAttribute}">
<resolver:Dependency ref="myLDAP" />
</resolver:AttributeDefinition>
<!-- --> ← アンコメント(idp.persistentId.sourceAttributeで指定した属性がLDAPで定義されているのみで、attribute-resolver.xmlに対応するresolver:AttributeDefinitionが存在しない場合)
<!-- Stored targeted ID connector --> (省略)
<!-- --> ← アンコメント
<resolver:DataConnector id="storedID" xsi:type="dc:StoredId"
generatedAttributeID="storedID"
sourceAttributeID="%{idp.persistentId.sourceAttribute}"
salt="%{idp.persistentId.salt}">
<resolver:Dependency ref="%{idp.persistentId.sourceAttribute}" />
<dc:BeanManagedConnection>MyDataSource</dc:BeanManagedConnection>
</resolver:DataConnector>
<!-- --> ← アンコメント
|
※端末のサイズによっては表記がずれる可能性がございます。画面を広くしてご覧ください。
...
...
7.
...
Jettyを再起動する
すべての作業が終わりましたらTomcatを再起動してください。すべての作業が終わりましたらJettyを再起動してください。
参考: GakuNinShare:Shibboleth IdP 3 のstoredIdの項