子ページ
  • 複数台のLDAPサーバを参照するための方法

このページの古いバージョンを表示しています。現在のバージョンを表示します。

現在のバージョンとの相違点 ページ履歴を表示

« 前のバージョン バージョン 18 次のバージョン »

ここでは2つの方法をご紹介します。

1. 複数台LDAPサーバ向けのLDAPプロキシサーバを使用する

複数台のLDAPサーバ向けにLDAPプロキシサーバを設置し、IdPにはLDAPプロキシサーバを参照させます。
使用するLDAPプロキシサーバの設定方法について、まとめられた資料があります。資料はCentOS 5系で記載されたものであるため、利用するバージョンに合わせて適宜読み替える必要があります。

プロキシサーバを構築する際、ログイン画面で入力するID(Shibboleth内部ではprincipalと表現されます)について、同一のIDが複数のLDAPツリー上に存在しないことを確認してください。同一のIDが存在する場合には、属性取得で問題が発生します。uidがこの条件を満たさない場合は、メールアドレスや学籍番号・教職員番号等、他のLDAP属性を使うことを検討してください。

2. IdPの設定ファイルで複数台LDAPサーバを指定する

IdPの設定で複数のLDAPツリー或いは複数のLDAPサーバを参照する例がShibboleth Wiki:LDAPAuthnConfigurationの"DNResolution"の項にあります。最初の例("Single Directory with multiple branches"の"Extensible Matching")はLDAPサーバが一台のみで検索すべき複数のLDAPツリーがサブツリーの関係にある環境向けで、ldap.propertiesのみの変更で対応が可能です。idp.authn.LDAP.baseDNのサブツリーを検索するようidp.authn.LDAP.subtreeSearchidp.authn.LDAP.userFilterを設定します。

  • LDAPサーバが一台であり複数のLDAPツリーがサブツリーの関係にある場合の例

    /opt/shibboleth-idp/conf/ldap.properties の設定例
    # Search DN resolution, used by anonSearchAuthenticator, bindSearchAuthenticator
    # for AD: CN=Users,DC=example,DC=org
    idp.authn.LDAP.baseDN = o=test_o,dc=ac,c=JP
    idp.authn.LDAP.subtreeSearch = true ← trueを設定
    idp.authn.LDAP.userFilter = (&(|(ou:dn:=Test Unit1)(ou:dn:=technology))(uid={user})) ← o=test_o,dc=ac,c=JPのサブツリー、ou=Test Unit1とou=technologyを検索するよう設定

次の2つの例("Single Directory with multiple branches - Aggregate DN Resolver"および"Multiple Directories")は複数のLDAPツリーがサブツリーとして扱えない環境、或いはLDAPサーバが複数の環境向けで、ldap.propertiesldap-authn-config.xmlを変更します。
LDAPサーバ/LDAPツリーの数に応じて、ldap.properties内の項目を追加してauthn-ldap-config.xmlでそれらを参照するようにします。
また、これらの例は認証処理のための設定なので、SPへ送出する属性をLDAPから取得している場合はattribute-resolver.xmlを変更し、ldap.propertiesに追加した項目を参照するLDAP DataConnectorを追加します。

  • LDAPサーバが一台であり複数のLDAPツリーがサブツリーとして扱えない場合の例

    /opt/shibboleth-idp/conf/authn/ldap-authn-config.xml の設定例
        <bean name="aggregateAuthenticator" class="org.ldaptive.auth.Authenticator">
            <constructor-arg index="0" ref="aggregateDnResolver" />
            <constructor-arg index="1" ref="aggregateAuthHandler" />
        </bean>
        <bean id="aggregateDnResolver" class="org.ldaptive.auth.AggregateDnResolver">
            <constructor-arg index="0" ref="dnResolvers" />
        </bean>
        <bean id="aggregateAuthHandler" class="org.ldaptive.auth.AggregateDnResolver$AuthenticationHandler" p:authenticationHandlers-ref="authHandlers" />
        <util:map id="dnResolvers">
            <entry key="filter1" value-ref="dnResolver1" />
            <entry key="filter2" value-ref="dnResolver2" />
        </util:map>
        <!-- Define two DN resolvers that use anonymous search against the same directory -->
        <bean id="dnResolver1" class="org.ldaptive.auth.PooledSearchDnResolver" p:baseDn="%{idp.authn.LDAP.baseDN}"
              p:subtreeSearch="%{idp.authn.LDAP.subtreeSearch:false}" p:userFilter="%{idp.authn.LDAP.userFilter}"
              p:connectionFactory-ref="anonSearchPooledConnectionFactory" />
        <bean id="dnResolver2" class="org.ldaptive.auth.PooledSearchDnResolver" p:baseDn="%{idp.authn.LDAP.baseDN2}"
              p:subtreeSearch="%{idp.authn.LDAP.subtreeSearch:false}" p:userFilter="%{idp.authn.LDAP.userFilter2}"
              p:connectionFactory-ref="anonSearchPooledConnectionFactory" />
        <!-- Use the same authentication handler for both DN resolvers -->
        <util:map id="authHandlers">
            <entry key="filter1" value-ref="authHandler" />
            <entry key="filter2" value-ref="authHandler" />
        </util:map> ← </beans>の前に追加

    </beans> 
    /opt/shibboleth-idp/conf/ldap.properties の設定例
    idp.authn.LDAP.authenticator = aggregateAuthenticator ← ldap-authn-config.xmlに追加したclass="org.ldaptive.auth.Authenticator"のbeanのnameに変更
    (省略)
    # Search DN resolution, used by anonSearchAuthenticator, bindSearchAuthenticator
    # for AD: CN=Users,DC=example,DC=org
    idp.authn.LDAP.baseDN = LDAPツリー1のBaseDN ← 変更
    idp.authn.LDAP.baseDN2 = LDAPツリー2のBaseDN ← 追加
    idp.authn.LDAP.subtreeSearch = true
    idp.authn.LDAP.userFilter = (LDAPツリー1の検索キー={user}) ← 変更
    idp.authn.LDAP.userFilter2 = (LDAPツリー2の検索キー={user}) ← 追加
    (省略)
    # LDAP attribute configuration, see attribute-resolver.xml
    # Note, this likely won't apply to the use of legacy V2 resolver configurations
    idp.attribute.resolver.LDAP.ldapURL = %{idp.authn.LDAP.ldapURL}
    idp.attribute.resolver.LDAP.baseDN = %{idp.authn.LDAP.baseDN:undefined}
    idp.attribute.resolver.LDAP.baseDN2 = %{idp.authn.LDAP.baseDN2:undefined} ← 追加
    idp.attribute.resolver.LDAP.bindDN = %{idp.authn.LDAP.bindDN:undefined}
    /opt/shibboleth-idp/conf/attribute-resolver.xml の設定例

        <resolver:DataConnector id="myLDAP" xsi:type="dc:LDAPDirectory"
            ldapURL="%{idp.attribute.resolver.LDAP.ldapURL}"
            baseDN="%{idp.attribute.resolver.LDAP.baseDN}"
            principal="%{idp.attribute.resolver.LDAP.bindDN}"
            principalCredential="%{idp.attribute.resolver.LDAP.bindDNCredential}"
            noResultIsError="True" ← 追加
            useStartTLS="%{idp.attribute.resolver.LDAP.useStartTLS:true}">
            <resolver:FailoverDataConnector ref="myLDAP2" /> ← 追加(dcより前に追加する必要があります)
            <dc:FilterTemplate>
                <![CDATA[
                    %{idp.attribute.resolver.LDAP.searchFilter}
                ]]>
            </dc:FilterTemplate>
            <dc:StartTLSTrustCredential id="LDAPtoIdPCredential" xsi:type="sec:X509ResourceBacked">
                <sec:Certificate>%{idp.attribute.resolver.LDAP.trustCertificates}</sec:Certificate>
            </dc:StartTLSTrustCredential>
        </resolver:DataConnector>
        ↓以下の行を追加
        <resolver:DataConnector id="myLDAP2" xsi:type="dc:LDAPDirectory"

            ldapURL="%{idp.attribute.resolver.LDAP.ldapURL}"
            baseDN="%{idp.attribute.resolver.LDAP.baseDN2}"
            principal="%{idp.attribute.resolver.LDAP.bindDN}"
            principalCredential="%{idp.attribute.resolver.LDAP.bindDNCredential}"
            noResultIsError="True"
            useStartTLS="%{idp.attribute.resolver.LDAP.useStartTLS:true}">
            <dc:FilterTemplate>
                <![CDATA[
                    %{idp.attribute.resolver.LDAP.searchFilter}
                ]]>
            </dc:FilterTemplate>
            <dc:StartTLSTrustCredential id="LDAPtoIdPCredential" xsi:type="sec:X509ResourceBacked">
                <sec:Certificate>%{idp.attribute.resolver.LDAP.trustCertificates}</sec:Certificate>
            </dc:StartTLSTrustCredential>
        </resolver:DataConnector>

  • LDAPサーバが複数である場合の例

    /opt/shibboleth-idp/conf/authn/ldap-authn-config.xml の設定例

        <alias name="%{idp.authn.LDAP.sslConfig2:certificateTrust2}" alias="sslConfig2" />
        <bean id="certificateTrust2" class="org.ldaptive.ssl.SslConfig">
            <property name="credentialConfig">
                <bean parent="shibboleth.X509ResourceCredentialConfig" p:trustCertificates="%{idp.authn.LDAP.trustCertificates2:undefined}" />
            </property>
        </bean>
        <bean id="keyStoreTrust2" class="org.ldaptive.ssl.SslConfig">
            <property name="credentialConfig">
                <bean parent="shibboleth.KeystoreResourceCredentialConfig" p:truststore="%{idp.authn.LDAP.trustStore2:undefined}" />
            </property>
        </bean>
        <bean name="aggregateAuthenticator" class="org.ldaptive.auth.Authenticator"
              c:resolver-ref="aggregateDnResolver"
              c:handler-ref="aggregateAuthHandler" />

        <!-- Aggregate DN resolution -->
        <bean id="aggregateDnResolver" class="org.ldaptive.auth.AggregateDnResolver"
              c:resolvers-ref="dnResolvers"
              p:allowMultipleDns="true" />
        <util:map id="dnResolvers">
            <entry key="directory1" value-ref="bindSearchDnResolver1" />
            <entry key="directory2" value-ref="bindSearchDnResolver2" />
        </util:map>

        <!-- DN resolver 1 -->
        <bean id="bindSearchDnResolver1" class="org.ldaptive.auth.PooledSearchDnResolver"
              p:baseDn="#{'%{idp.authn.LDAP.baseDN:undefined}'.trim()}"
              p:subtreeSearch="%{idp.authn.LDAP.subtreeSearch:false}"
              p:userFilter="#{'%{idp.authn.LDAP.userFilter:undefined}'.trim()}"
              p:connectionFactory-ref="bindSearchPooledConnectionFactory" />
        <bean id="bindSearchPooledConnectionFactory1" class="org.ldaptive.pool.PooledConnectionFactory"
              p:connectionPool-ref="bindSearchConnectionPool1" />
        <bean id="bindSearchConnectionPool1" class="org.ldaptive.pool.BlockingConnectionPool" parent="connectionPool"
              p:connectionFactory-ref="bindSearchConnectionFactory1"
              p:name="search-pool1" />
        <bean id="bindSearchConnectionFactory1" class="org.ldaptive.DefaultConnectionFactory"
              p:connectionConfig-ref="bindSearchConnectionConfig1" />
        <bean id="bindSearchConnectionConfig1" parent="connectionConfig"
              p:connectionInitializer-ref="bindConnectionInitializer1"
              p:ldapUrl="%{idp.authn.LDAP.ldapURL}" />
        <bean id="bindConnectionInitializer1" class="org.ldaptive.BindConnectionInitializer"
              p:bindDn="#{'%{idp.authn.LDAP.bindDN:undefined}'.trim()}">
            <property name="bindCredential">
                <bean class="org.ldaptive.Credential" c:password="%{idp.authn.LDAP.bindDNCredential:undefined}" />
            </property>
        </bean>
        <!-- DN resolver 2 -->
        <bean id="bindSearchDnResolver2" class="org.ldaptive.auth.PooledSearchDnResolver"
              p:baseDn="#{'%{idp.authn.LDAP.baseDN2:undefined}'.trim()}"
              p:subtreeSearch="%{idp.authn.LDAP.subtreeSearch:false}"
              p:userFilter="#{'%{idp.authn.LDAP.userFilter2:undefined}'.trim()}"
              p:connectionFactory-ref="bindSearchPooledConnectionFactory" />
        <bean id="bindSearchPooledConnectionFactory2" class="org.ldaptive.pool.PooledConnectionFactory"
              p:connectionPool-ref="bindSearchConnectionPool2" />
        <bean id="bindSearchConnectionPool2" class="org.ldaptive.pool.BlockingConnectionPool" parent="connectionPool"
              p:connectionFactory-ref="bindSearchConnectionFactory2"
              p:name="search-pool2" />
        <bean id="bindSearchConnectionFactory2" class="org.ldaptive.DefaultConnectionFactory"
              p:connectionConfig-ref="bindSearchConnectionConfig2" />
        <bean id="bindSearchConnectionConfig2" parent="connectionConfig"
              p:connectionInitializer-ref="bindConnectionInitializer2"
              p:ldapUrl="%{idp.authn.LDAP.ldapURL2}"
              p:useStartTLS="%{idp.authn.LDAP.useStartTLS2:true}"
              p:useSSL="%{idp.authn.LDAP.useSSL2:false}"
              p:connectTimeout="%{idp.authn.LDAP.connectTimeout2:3000}"
              p:sslConfig-ref="sslConfig2" />
        <bean id="bindConnectionInitializer2" class="org.ldaptive.BindConnectionInitializer"
              p:bindDn="#{'%{idp.authn.LDAP.bindDN2:undefined}'.trim()}">
            <property name="bindCredential">
                <bean class="org.ldaptive.Credential" c:password="%{idp.authn.LDAP.bindDNCredential2:undefined}" />
            </property>
        </bean>

        <!-- Aggregate authentication -->
        <bean id="aggregateAuthHandler" class="org.ldaptive.auth.AggregateDnResolver$AuthenticationHandler"
              p:authenticationHandlers-ref="authHandlers" />
        <util:map id="authHandlers">
            <entry key="directory1" value-ref="authHandler1" />
            <entry key="directory2" value-ref="authHandler2" />
        </util:map>

        <!-- Authentication handler 1 -->
        <bean id="authHandler1" class="org.ldaptive.auth.PooledBindAuthenticationHandler"
              p:connectionFactory-ref="bindPooledConnectionFactory1" />
        <bean id="bindPooledConnectionFactory1" class="org.ldaptive.pool.PooledConnectionFactory"
              p:connectionPool-ref="bindConnectionPool1" />
        <bean id="bindConnectionPool1" class="org.ldaptive.pool.BlockingConnectionPool" parent="connectionPool"
              p:connectionFactory-ref="bindConnectionFactory1"
              p:name="bind-pool1" />
        <bean id="bindConnectionFactory1" class="org.ldaptive.DefaultConnectionFactory"
              p:connectionConfig-ref="bindConnectionConfig1" />
        <bean id="bindConnectionConfig1" parent="connectionConfig"
              p:ldapUrl="%{idp.authn.LDAP.ldapURL}" />
        <!-- Authentication handler 2 -->
        <bean id="authHandler2" class="org.ldaptive.auth.PooledBindAuthenticationHandler"
              p:connectionFactory-ref="bindPooledConnectionFactory2" />
        <bean id="bindPooledConnectionFactory2" class="org.ldaptive.pool.PooledConnectionFactory"
              p:connectionPool-ref="bindConnectionPool2" />
        <bean id="bindConnectionPool2" class="org.ldaptive.pool.BlockingConnectionPool" parent="connectionPool"
              p:connectionFactory-ref="bindConnectionFactory2"
              p:name="bind-pool2" />
        <bean id="bindConnectionFactory2" class="org.ldaptive.DefaultConnectionFactory"
              p:connectionConfig-ref="bindConnectionConfig2" />
        <bean id="bindConnectionConfig2" parent="connectionConfig"
              p:ldapUrl="%{idp.authn.LDAP.ldapURL2}"
              p:useStartTLS="%{idp.authn.LDAP.useStartTLS2:true}"
              p:useSSL="%{idp.authn.LDAP.useSSL2:false}"
              p:connectTimeout="%{idp.authn.LDAP.connectTimeout2:3000}"
              p:sslConfig-ref="sslConfig2" /> ← </beans>の前に追加
     
    </beans>

    /opt/shibboleth-idp/conf/ldap.properties の設定例

    idp.authn.LDAP.authenticator = aggregateAuthenticator ← ldap-authn-config.xmlに追加したclass="org.ldaptive.auth.Authenticator"のbeanのnameに変更

    ## Connection properties ##
    idp.authn.LDAP.ldapURL                          = LDAPサーバ1のURL ← 変更
    idp.authn.LDAP.ldapURL2                          = LDAPサーバ2のURL ← 追加
    idp.authn.LDAP.useStartTLS                      = true
    idp.authn.LDAP.useStartTLS2                      = true
    #idp.authn.LDAP.useSSL                          = false
    #idp.authn.LDAP.connectTimeout                  = 3000

    ## SSL configuration, either jvmTrust, certificateTrust, or keyStoreTrust

    idp.authn.LDAP.sslConfig                       = certificateTrust
    ↓ 追加(certificateTrustかkeyStoreTrustを指定する際はldap-authn-config.xmlに追加したLDAPサーバ2用のclass="org.ldaptive.ssl.SslConfig"のbeanのidを指定)

    idp.authn.LDAP.sslConfig2                       = certificateTrust2 ← 追加
    ## If using certificateTrust above, set to the trusted certificate's path
    idp.authn.LDAP.trustCertificates                = LDAPサーバ1の証明書 ← 変更
    idp.authn.LDAP.trustCertificates2                = LDAPサーバ2の証明書 ← 追加
    ## If using keyStoreTrust above, set to the truststore path
    idp.authn.LDAP.trustStore                       = LDAPサーバ1のキーストア ← 変更
    idp.authn.LDAP.trustStore2                       = LDAPサーバ2のキーストア ← 追加
    (省略)

    # Search DN resolution, used by anonSearchAuthenticator, bindSearchAuthenticator
    # for AD: CN=Users,DC=example,DC=org
    idp.authn.LDAP.baseDN                           = LDAPサーバ1のBaseDN ← 変更
    idp.authn.LDAP.baseDN2                           = LDAPサーバ2のBaseDN ← 追加
    idp.authn.LDAP.subtreeSearch                   = true
    idp.authn.LDAP.userFilter                       = (LDAPサーバ1の検索キー={user}) ← 変更
    idp.authn.LDAP.userFilter2                       = (LDAPサーバ2の検索キー={user}) ← 追加
    # bind search configuration
    # for AD: idp.authn.LDAP.bindDN=adminuser@domain.com
    idp.authn.LDAP.bindDN                           = LDAPサーバ1のBindDN ← 変更
    idp.authn.LDAP.bindDN2                           = LDAPサーバ2のBindDN ← 追加
    idp.authn.LDAP.bindDNCredential                 = LDAPサーバ1のBindDNパスワード ← 変更
    idp.authn.LDAP.bindDNCredential2                 = LDAPサーバ2のBindDNパスワード ← 追加
    (省略)
    # LDAP attribute configuration, see attribute-resolver.xml
    # Note, this likely won't apply to the use of legacy V2 resolver configurations
    idp.attribute.resolver.LDAP.ldapURL             = %{idp.authn.LDAP.ldapURL}
    idp.attribute.resolver.LDAP.ldapURL2             = %{idp.authn.LDAP.ldapURL2} ← 追加
    idp.attribute.resolver.LDAP.baseDN              = %{idp.authn.LDAP.baseDN:undefined}
    idp.attribute.resolver.LDAP.baseDN2              = %{idp.authn.LDAP.baseDN2:undefined} ← 追加
    idp.attribute.resolver.LDAP.bindDN              = %{idp.authn.LDAP.bindDN:undefined}
    idp.attribute.resolver.LDAP.bindDN2              = %{idp.authn.LDAP.bindDN2:undefined} ← 追加
    idp.attribute.resolver.LDAP.bindDNCredential    = %{idp.authn.LDAP.bindDNCredential:undefined}
    idp.attribute.resolver.LDAP.bindDNCredential2    = %{idp.authn.LDAP.bindDNCredential2:undefined} ← 追加
    idp.attribute.resolver.LDAP.useStartTLS         = %{idp.authn.LDAP.useStartTLS:true}
    idp.attribute.resolver.LDAP.useStartTLS2         = %{idp.authn.LDAP.useStartTLS2:true} ← 追加
    idp.attribute.resolver.LDAP.trustCertificates   = %{idp.authn.LDAP.trustCertificates:undefined}
    idp.attribute.resolver.LDAP.trustCertificates2   = %{idp.authn.LDAP.trustCertificates2:undefined} ← 追加
    idp.attribute.resolver.LDAP.searchFilter        = (LDAPサーバ1の検索キー=$resolutionContext.principal) ← 変更
    idp.attribute.resolver.LDAP.searchFilter2        = (LDAPサーバ2の検索キー=$resolutionContext.principal) ← 追加
    idp.attribute.resolver.LDAP.returnAttributes    = cn,homephone,mail

    /opt/shibboleth-idp/conf/attribute-resolver.xml の設定例

        <resolver:DataConnector id="myLDAP" xsi:type="dc:LDAPDirectory"
            ldapURL="%{idp.attribute.resolver.LDAP.ldapURL}"
            baseDN="%{idp.attribute.resolver.LDAP.baseDN}"
            principal="%{idp.attribute.resolver.LDAP.bindDN}"
            principalCredential="%{idp.attribute.resolver.LDAP.bindDNCredential}"
            noResultIsError="True" ← 追加
            useStartTLS="%{idp.attribute.resolver.LDAP.useStartTLS:true}">
            <resolver:FailoverDataConnector ref="myLDAP2" /> ← 追加(dcより前に追加する必要があります)
            <dc:FilterTemplate>
                <![CDATA[
                    %{idp.attribute.resolver.LDAP.searchFilter}
                ]]>
            </dc:FilterTemplate>
            <dc:StartTLSTrustCredential id="LDAPtoIdPCredential" xsi:type="sec:X509ResourceBacked">
                <sec:Certificate>%{idp.attribute.resolver.LDAP.trustCertificates}</sec:Certificate>
            </dc:StartTLSTrustCredential>
        </resolver:DataConnector>
        ↓以下の行を追加
        <resolver:DataConnector id="myLDAP2" xsi:type="dc:LDAPDirectory"

            ldapURL="%{idp.attribute.resolver.LDAP.ldapURL2}"
            baseDN="%{idp.attribute.resolver.LDAP.baseDN2}"
            principal="%{idp.attribute.resolver.LDAP.bindDN2}"
            principalCredential="%{idp.attribute.resolver.LDAP.bindDNCredential2}"
            noResultIsError="True"
            useStartTLS="%{idp.attribute.resolver.LDAP.useStartTLS2:true}">
            <dc:FilterTemplate>
                <![CDATA[
                    %{idp.attribute.resolver.LDAP.searchFilter2}
                ]]>
            </dc:FilterTemplate>
            <dc:StartTLSTrustCredential id="LDAPtoIdPCredential" xsi:type="sec:X509ResourceBacked">
                <sec:Certificate>%{idp.attribute.resolver.LDAP.trustCertificates2}</sec:Certificate>
            </dc:StartTLSTrustCredential>
        </resolver:DataConnector>

attribute-filter.xmlの変更はDataConnector "myLDAP" にデータが見つからない場合エラーとして扱うようにし、フェイルオーバー処理としてDataConnector "myLDAP2" から改めてデータを検索する設定になります。

1つ目の方法と同様、同一のIDが複数のLDAPツリー上に存在すると問題になりますので、uidがこの条件を満たさない場合は他のLDAP属性をID(principal)として使うようにしてください。

  • ラベルがありません